info@cnvestar.com

0086-532-8099 9612

Room 1-604,Art&Tec.Space,No.63, Haier Rd,Qingdao,china

KTN Air Conditioning Compressors: A 3.0mm Casing and a 3.1 COP

19th Nov, 2026

KTN Air Conditioning Compressors: A 3.0mm Casing and a 3.1 COP

KTN uses a 3.0mm metal casing with anti-rust treatment on the outside, and the marking is heat-transfer printed rather than a sticker. A sticker can be replaced; a shell rusted through cannot. KTN's Refrigeran list : legacy R22, the mainstream R410A and R32, and the ultra-low GWP options R290, R454B and R1234yf.


At unit level, KTN air-conditioning compressors reach up to 3.1 COP, paired with an 18,584 BTU rapid-cooling example — enough headroom for residential and light commercial work.

At portfolio level, the four technologies connect:

  • Rotary 1–6HP, COP 2.9–3.2 — small units, portable AC, window units;

  • Scroll 3–30HP, COP 3.2–3.6 — residential central AC, heat pumps;

  • Reciprocating 5–100HP, COP 2.8–3.1 — cold rooms and low-temperature duty;

  • Screw 20–200HP, COP 3.2–3.8 — large chillers.

Fitting In Is the Real Advantage

KTN units run on 208–230V/60Hz in single and three-phase, with 460V/60Hz three-phase available, on standard mounting dimensions for both new builds and replacements.

The service market cares most: a compressor swap goes wrong when the piping will not line up or the feet are a few millimetres off. Standard dimensions mean the technician does not rebuild the bracket on site.


leave message